mouseover for larger image
Oxford Presence Patient Hoist
The Oxford® Presence is a heavy-duty mobile patient lift, competent enough to handle almost any patient-handling task.Its incredible lifting range ensures it can cope easily with the most critical of transfers from the floor to high level surfaces.
- Safe Working Load 227kg
- Outstanding lifting range (440mm — 1910mm)
- On-board Smart™ Monitor diagnostic control box
- Ergonomic design considerations
- Powered leg positioning
- Interchangeable spreader bar ⁄ cradle configurations
- Powered cradle and digital weigh-scale options
- Full selection of slings and accessories
- Heavy Duty Sling
Ergonomic design considerations
The Presence was designed with the five key principles of moving and handling in mind.
- Get close to the load
- Use a wide stable base
- Ensure a comfortable firm grasp
- Keep spine close to neutral
- Make sure movement is smooth
Hand control clip ensures convenient storage when not in use.
Foot ‘push pad’ helps reduce the force needed to initiate forward movement.
Over-sized push handle for improved handling and manoeuvrability.
Outstanding lifting range
 |  |
Whether from the floor or onto a high surface the Presence has an astonishing range of movement.The minimum height with the six point spreader bar is just 440mm, which ensures excellent off the floor transfers.
Conversely, if you wish to access high beds or nursing surfaces, the Presence will lift up to 1910mm.This is especially useful where you have variable height beds, special lift mattresses.
Smart™ Monitor
The Smart™ Monitor control system records the exact amount of work completed by the actuator each and every time the lift is used,regardless of a patient’s weight or lift height covered. The intelligent system advises the user to schedule key maintenance helping to ensure your lift remains in optimum condition.
- Identifies total lift actuations and work completed
- Identifies lift overloads (exceeding SWL)
- Identifies service interval periods
- Increases patient safety and product service life
Sculptured design allows
you to get closer to the lift
Greater spatial area for carer and patient
The additional space promotes better ergonomics for the carer, as it is possible to interact more closely with the patient.
The Presence's unique Swan-neck leg design also allows the lift to get close to the widest of obstacles. This is especially useful when encountering large chairs, bulky commodes and wheel chairs.
Powered Leg Positioning
The Presence has two powerful electric motors which open and close the legs automatically.
Tapered ‘swan neck’ leg design
Allows greater internal area, whilst not compromising overall product width.
Low Leg Option
The low leg Presence maintains the exact same functionality of the standard Presence with the added benefit of a lower leg height to allow better access under low bed frames and other furniture.
Lift height, safe working load and all other elements remain unchanged.
Low-Profile Digital Weigh Scale
Click here for instruction manual
The Presence can be supplied with a low-profile digital weigh scale (A).
The digital weigh scale offers a number of significant benefits for the user:-
- Its compact, low-profile design ensures maximum lift height is not compromised when in use.
- Its integrated dual-screen display means the digital weigh scale can be viewed from either side of the boom, making the scale very easy to use.
- It is Class III certified meaning it provides a highly accurate measurement of weight each and every time – critically important for on-going patient monitoring.
The new weigh scale is available in 3 different attachment versions:
With 6-point spreader bar (UNISCALE101)
With 4-point manual cradle (UNISCALE100)
With 4-point adjustable power cradle (UNISCALE102)
Click for:
- Introduction Video
- Use Videos
- Brochure
- User Manual
- Parts Manual
- Technicial Specifications
Interchangeable spreader bar/cradle
One of the restrictions of using certain lifts are the slings which you can use on the product. The Presence however, gives you a choice of sling systems.
You can use the conventional 6 point Oxford spreader bar (C), or the manual (D) or powered 4 point positioning cradle (B). This choice provides the carer with a greater option of slings to use when considering support, comfort and flexibility for the patient.
(Click here for a Cradle brochure)
Product Codes:
OXF–PRESENCE: Presence Hoist with 6 point spreader bar
OXF–PRESENCE+4PTAPC: Presence Hoist With powered Pivot Frame
OXF–PRESENCE+OY0050: Presence Hoist With manual Pivot Frame
Click here to enquire about the Oxford Presence Patient Hoist.
Presence Technical Specifications
| Weights | |
| Mast, Base & Boom Assembly | 37 kg |
|---|---|
| Power Pack | 3 kg |
| Total | 40 kg |
| Base Assembly (not inc battery) | 20 kg |
| Mast & Boom (not inc battery) | 17 kg |
| 4 Point Position Cradle (manual) | 6 kg |
| 4 Point Position Cradle (powered) | 9 kg |
| Electrical Specifications |
| Battery 1 x 24 volt rechargeable sealed lead acid type |
| Battery capacity 2.9 Ampere hours |
| Charger rated input 240V AC 50/60Hz |
| Charger rated output 29.5 V DC Max 19W ⁄ IPX5 |
| Electric Shock Protection |
| Charger — class II |
| Lift — internal power source |
| Degree of Shock Protection |
| Charger — Type B |
| Lift — Type B |
| Intended operating environment >+5° <+40°. |
| Outside this environment, functionality and safety may be comprimised |
| Specifications | |
| Safe Working Load | 227 kg |
|---|---|
| Maximum Overall Length | 1460 mm |
| Minimum Overall Length | 1400 mm |
| Maximum Overall Height | 2065 mm |
| Minimum Overall Height | 1460 mm |
| Spreader Bar Maximum Height | 1910 mm |
| Spreader Bar Minimum Height | 430 mm |
| Height at Maximum Reach | 1310 mm |
| Reach at Maximum Height | 650 mm |
| Reach at Minimum Height | 400 mm |
| Maximum Reach* | 930 mm |
| * Reach = centre of spreader bar to the front of the mast | |
| Turning Radius | 1630 mm |
| Legs Open - External Width | 1150 mm |
| Legs Open - Internal Width | 1020 mm |
| Legs Closed - External Width | 670 mm |
| Legs Closed - Internal Width | 550 mm |
| Overall Height of Legs | 120 mm |
| Overall Height of Legs (low leg option) | 59 mm |
| Ground Clearance | 35 mm |
| Ground Clearance (low leg option) | 20 mm |
| Front Twin Castors | 100 mm |
| Front Twin Castors (low leg option) | 50 mm |
| Rear Braked Castors | 100 mm |
| 4 Point Position Cradle (measurement to top of location pins) | |
| Cradle Max. Height | 1550 mm |
| Cradle Min. Height (usable) | 390 mm |
Return to top of page
